Photo by Gina Barker
Photo by Gina Barker
I printed a clear resin version of both the eye plate and the base holder with reduced waste material to observe the difference in material texture and density. The modifications in this design consist of removing the rounded back face for a flat surface and hollowing out the eye stems with a 10mm extrusion.
This print uses the same technology as the black resin SLS Form 2 print however it only took 6.12 hours. As this was printed prior to testing the magnets, I did not reduce the material between magnet chambers and yet the magnetic link is noticeably stronger; I consider this is due to the resin being less dense.
|◉ロ◉|
Design Before Eleven 